1.3inch LCD Display Module, IPS Screen, 240×240 HD Resolution, SPI Interface

This is a general LCD display Module, IPS screen, 1.3inch diagonal, 240×240 HD resolution, with embedded controller, communicating via SPI interface.

Features:

• SPI interface, requires minimum GPIO for controlling
• Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

• Driver: ST7789
• Interface: SPI
• Display color: RGB, 65K color
• Resolution: 240×240
• Backlight: LED
• Operating voltage: 3.3V/5V

Interface

• VCC – 3.3V / 5V power input
• GND – Ground
• DIN – SPI MOSI pin
• CLK – SPI SCK pin
• CS – SPI chip selection, low active
• DC – Data/Command selection (high for data, low for command)
• RST – External reset, low active
• BL-Backlight

Outline Dimensions

Development Resources

Wiki :www.waveshare.com/wiki/1.3inch_LCD_Module