iFlight Nazgul XL10 V6 Frame Overview

iFlight Nazgul XL10 V6 is a 10 inch FPV drone frame kit for long-range, cinematic, and high-stability 10 inch builds. The V6 frame uses a full 3K carbon fiber airframe, a wide True-X layout, and reinforced 7 mm arms to give larger propeller builds a rigid base with balanced flight characteristics.

This listing is for the frame kit, not a complete ready-to-fly drone. Motors, flight controller, ESC, VTX, receiver, camera, propellers, battery, and radio system should be selected separately according to your build plan.

Frame Design & Build Features

• 10 inch platform: designed for popular 10 inch style propellers and large long-range FPV layouts.
• True-X geometry: wide stance and symmetrical geometry help keep the build balanced in the air.
• Full 3K carbon fiber structure: rigid plates and arms support larger motors, heavier batteries, and long-range equipment.
• Video system space: compatible with DJI O3 Air Unit, Caddx Vista HD system, and BLITZ Whoop 1.6W VTX style builds.
• Flexible stack mounting: supports both 30.5 x 30.5 mm and 20 x 20 mm stack layouts, plus multiple VTX mounting patterns.
• TPU protection: supplied TPU set and antenna mounts help protect exposed areas and organize the FPV installation.

Technical Specifications

Compatibility & Build Notes

• The XL10 V6 is intended for custom FPV builds; it does not include electronics or tuning presets.
• Choose motors, ESC, propellers, flight controller, battery, and video hardware according to the weight target and flight style.
• The official compatibility notes reference DJI O3 Air Unit, Caddx Vista HD system, and BLITZ Whoop VTX style installations, but final fit depends on your wiring, antenna path, camera mount, and cooling clearance.
• XL10 V6 parts are not listed as compatible with XL10 V5 frame parts because the V6 design changed.
• For large 10 inch builds, check local regulations, failsafe settings, GPS rescue setup, battery retention, and propeller clearance before flight.

Packing List & FAQ

Packing list: 1 x Nazgul XL10 V6 frame, 1 x screw bag, 1 x TPU set, 1 x battery anti-slip mat, and 2 x battery straps. Strap color may vary by batch.

Is this a complete drone?

No. It is a 10 inch frame kit. Electronics, motors, propellers, battery, receiver, FPV system, and controller hardware are not included unless a separate bundle states otherwise.

What propeller size is it designed for?

The XL10 V6 is a 10 inch frame and is designed around popular 10 inch style propellers. Always verify prop clearance with your chosen motors and props before powering the build.

Can I install DJI O3 or Caddx Vista?

Yes. The official frame notes list DJI O3 Air Unit and Caddx Vista HD system compatibility. Keep enough space for cables, antennas, and airflow during installation.

Does it support both 30.5 mm and 20 mm stacks?

Yes. The frame supports 30.5 x 30.5 mm and 20 x 20 mm flight-stack mounting, with a stated maximum flight-stack height of 19 mm.

Are XL10 V5 and XL10 V6 parts interchangeable?

No. iFlight support notes that XL10 V6 frame parts and XL10 V5 frame parts are not compatible because of design changes.

Useful links

• OpenELAB iFlight XL10 V6 Listing
• iFlight XL10 V6 Assembly Guide
• OpenELAB Contact Support
• OpenELAB Shipping Policy