HQProp LR10X5X3 Propeller Overview

HQProp LR10X5X3 is a 10 inch 3-blade long-range FPV propeller for larger quadcopters and cinematic builds that need more blade area than typical 5 inch props. The 10x5x3 geometry combines a 10 inch diameter, 5 inch pitch, and tri-blade layout for strong thrust response on compatible long-range motors.

This Shopify listing has separate CW and CCW variants. Confirm the selected direction, hub fit, motor KV, voltage, frame clearance, and ESC current before installation.

Key Features

• 10 inch long-range format: sized for large FPV frames and long-range/cinematic aircraft, not small freestyle frames.
• 10x5x3 geometry: 10 inch diameter, 5 inch pitch, and 3 blades for higher disk loading and strong prop authority.
• CW/CCW variant support: current Shopify variants are separate CW and CCW options, so select the direction needed for your motor layout.
• Glass fiber reinforced nylon: official product naming and reseller specifications identify this prop as black glass fiber reinforced nylon.
• 5 mm shaft fit: designed around the standard 5 mm motor shaft class used by many large FPV motors.
• Tuning boundary: final thrust, current draw, noise, and motor temperature depend on motor KV, battery voltage, payload, and tune.

Technical Specifications

Build & Safety Notes

• Balance and inspect large props before flight; discard any propeller with cracks, stress marks, bent tips, or damaged hub area.
• Install the correct CW or CCW prop on each motor. Wrong rotation direction can cause immediate loss of control on takeoff.
• Check prop-to-frame, prop-to-camera, and prop-to-battery clearance under vibration and arm flex.
• Run low-throttle hover checks first, then monitor motor and ESC temperature before using full throttle or carrying payload.
• Large 10 inch props can draw high current. Use a motor and ESC combination tested for the selected voltage and payload.

Packing List & FAQ

Packing list: selected HQProp LR10X5X3 propeller direction according to the Shopify variant and order quantity. This listing separates CW and CCW options; if you need a full quad set, order the required count of both directions.

Is LR10X5X3 for 5 inch FPV drones?

No. It is a 10 inch propeller and requires a compatible large frame with enough motor torque and blade clearance.

What does 10x5x3 mean?

It means 10 inch diameter, 5 inch pitch, and 3 blades.

Do I need both CW and CCW props?

Yes for a standard quadcopter. You need the correct clockwise and counter-clockwise directions according to your motor layout.

How do I avoid overloading the motor or ESC?

Check the motor manufacturer thrust table, ESC current rating, battery voltage, aircraft weight, and motor temperature during early tests.

Useful links

• OpenELAB HQProp LR10X5X3 Search
• Betaflight ESC and Motor Features
• OpenELAB Contact Support
• OpenELAB Shipping Policy