ThisAluminum Chassisin Blinka purple makes for an excellent robot body. It’s a single piece of bent 2mm thick aluminum, with a variety of holes, slots, and cutouts for mounting boards, sensors, and servos.The sides are notched to fit two DC Gear ‘TT’ motors perfectly- There are four M3 and nuts are included for mounting the motors. In the front you can screw on aball caster. You can build a very sturdy (and quite handsome!) little robot rover with this metal frame.

• It’s made of aluminum so it’s light and strong
• The anodizing is quite attractive as a mobile
• Can be used to build a 2-wheel mobile robot
• Tons of mounting holes & slots!
• You can drill and cut aluminum so it’s easy to modify
• There are ready mounting holes forArduino UNO, andRaspberry Pi 4(though, for Raspberry Pi, there is some slight error).

Note: This is a kit with loose parts, you need to assemble it yourself, DIY 🙂

Packing List:

1x chassis with motors, tires, freewheels and fitting screws (Color of chassis May very)

Then you will also need a microcontroller and motor driver that can drive the 5V DC motors. We recommend one of the following

• Arduino UNO, or
• Shield-2AMotor (drives two motors)
• Raspberry Pi 4

Mechanical Drawing: