*Standard package contents may differ based on standard order codes.
| Feature |
Description |
| Mobile Module |
4G LTE Cat 1 up to 10 Mbps download / 5 Mbps upload; 3G up to 384 kbps download/upload; 2G up to 296 kbps download / 236.8 kbps upload. |
| 3GPP Release |
Release 12. |
| Status Monitoring |
IMSI, ICCID, operator details, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC. |
| SMS Capabilities |
SMS status, configuration, send/read via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, autoreply, SMPP. |
| USSD Support |
Sending and reading Unstructured Supplementary Service Data messages. |
| Operator Lists |
Operator black/white list (by country or individual operators). |
| Multiple PDN |
Use of different PDNs for multiple network access and services. |
| Band Management |
Band lock, used band status display. |
| SIM PIN Management |
Setting, changing, or disabling the SIM card’s PIN. |
| APN Configuration |
Auto APN. |
| Bridge Mode |
Direct connection between mobile ISP and device on LAN. |
| Passthrough Mode |
Gateway assigns its mobile WAN IP address to another device on LAN. |
| Feature |
Description |
| Routing |
Static routing. |
| Network Protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT. |
| VoIP Passthrough Support |
H.323 and SIP-alg protocol NAT helpers for proper routing of VoIP packets. |
| Connection Monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection. |
| Firewall |
Port forward, traffic rules, custom rules, TTL target customization. |
| Firewall Status Page |
View all firewall statistics, rules, and rule counters. |
| Ports Management |
View device ports, enable/disable each, toggle auto-configuration, change transmission speed. |
| Network Topology |
Visual representation of the network, showing device connections. |
| DHCP |
Static and dynamic IP allocation, DHCP relay, server configuration, status, static leases with MAC wildcards. |
| QoS / SQM |
Traffic priority queuing by source/destination, service, protocol, or port; WMM, 802.11e. |
| DDNS |
Support for over 25 service providers; manual configuration for others. |
| DNS over HTTPS |
Proxy enabling secure DNS resolution by routing queries over HTTPS. |
| Network Backup |
Mobile, VRRP, wired options for automatic failover. |
| SSHFS |
Mount remote file system via SSH protocol. |
| Traffic Management |
Real-time monitoring, wireless signal charts, traffic usage history. |
| Feature |
Description |
| Authentication |
Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal & external RADIUS user authentication, IP & login attempts block, time-based login blocking, built-in random password generator. |
| Firewall |
Preconfigured rules via WebUI, unlimited configuration via CLI, DMZ, NAT, NAT-T, NAT64. |
| Attack Prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks). |
| VLAN |
Port and tag-based VLAN separation. |
| Mobile Quota Control |
Mobile data limit, customizable period, start time, warning limit, phone number. |
| Web Filter |
Blacklist for blocking unwanted websites, whitelist for specifying allowed sites. |
| Access Control |
Flexible control of SSH, web interface, CLI, and Telnet access. |
| SSL Certificate Generation |
Let’s Encrypt and SCEP certificate generation methods. |
| Feature |
Description |
| OpenVPN |
Multiple clients and a server can run simultaneously; 27 encryption methods. |
| IPsec |
XFRM, IKEv1, IKEv2 with 14 encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16). |
| GRE |
GRE tunnel, GRE tunnel over IPsec support. |
| PPTP, L2TP |
Client/Server instances can run simultaneously; L2TPv3, L2TP over IPsec support. |
| Stunnel |
Proxy designed to add TLS encryption functionality to existing clients and servers without code changes. |
| DMVPN |
Method of building scalable IPsec VPNs; Phase 2 and Phase 3, Dual Hub support. |
| SSTP |
SSTP client instance support. |
| ZeroTier |
ZeroTier VPN client support. |
| WireGuard |
WireGuard VPN client and server support. |
| Tinc |
Tinc offers encryption, authentication, and compression in its tunnels; client and server support. |
| Feature |
Details |
| Supported modes |
Server, Client |
| Supported connection types |
TCP, RTU (RS485) |
| Custom registers |
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality |
| Supported data formats |
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| Feature |
Description |
| RMS (Teltonika Remote Management System) |
Fully compatible for remote management, configuration, and monitoring of devices. |
| Cloud-based Monitoring |
Accessible via WebUI, ensuring real-time device monitoring and management. |
| Device Security Monitoring |
Track system events, signal strength, connected clients, and network status remotely. |
| Bulk Configuration |
Manage large-scale deployments with bulk configuration and update capabilities. |
| Platform |
Monitoring Features |
| ThingWorx |
WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| Cumulocity – Cloud of Things |
Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions |
| Azure IoT Hub |
Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support to execute RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service for zero-touch device provisioning |
| AWS IoT Core |
Utility to interact with the AWS cloud platform. Jobs Support: Call the device’s API using AWS Jobs functionality |
| Feature |
Details |
| Operating system |
RutOS (OpenWrt based Linux OS) |
| Supported languages |
Busybox shell, Lua, C, C++, and Python in Package manager |
| Development tools |
SDK package with build environment provided |
| GPL customization |
Create your own custom, branded firmware and web page application by changing colours, logos, and other elements |
| Package Manager |
A service used to install additional software on the device |
| Feature |
Details |
| I/Os |
2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB1452***) |
| Status LEDs |
3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED |
| SIM |
1 x SIM slot (Mini SIM 2FF), 1.8 V/3 V |
| Power |
1 x 4-pin power connector |
| Antennas |
1 x SMA for LTE |
| RS485 |
1 x 6-pin terminal block for 2-wire or 4-wire interface |
| Reset |
Reboot/User default reset/Factory reset button |
| USB |
1 x Virtual network interface via micro USB |
TRB145 FLYER (EN)TRB145 DATASHEET (EN)TRB145 QUICK START GUIDE (EN)TRB145*2**** FLYER (EN)TRB145*2**** DATASHEET (EN)
TRB145 QUICK START GUIDE (EN)FIRMWARE DOWNLOADSTRB145 USER MANUALCERTIFICATIONS & APPROVALSPRODUCT CHANGE NOTIFICATIONSSDK DOWNLOADSGPL DOWNLOADSTRB145 3D MODELS
