*Standard package contents may differ based on standard order codes.
| Feature |
Details |
| Mobile Module |
5G Sub-6GHz SA/NSA: 2.1/3.3 Gbps DL (4×4 MIMO), 900/600 Mbps UL (2×2)
4G LTE Cat 20: Up to 2.0 Gbps DL, 200 Mbps UL
3G: Up to 42 Mbps DL, 5.76 Mbps UL |
| 3GPP Release |
Release 15 |
| Status Indicators |
IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI, SINR, RSRP, RSRQ), EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC |
| SMS Features |
– SMS status, configuration
– Send/read SMS via HTTP POST/GET
– Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS
– Scheduled SMS, SMS autoreply
– SMPP support |
| USSD Support |
Sending and reading Unstructured Supplementary Service Data (USSD) messages |
| Operator Black/White List |
Configure black/white list by country or operator |
| Band Management |
Band lock and used band status display |
| SIM PIN Code Management |
Set, change, or disable SIM card PIN |
| APN Management |
Auto APN configuration |
| Bridge Mode |
Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough |
Gateway assigns its mobile WAN IP address to another device on LAN |
| Framed Routing |
Supports an IP network behind 5G UE |
| Feature |
Details |
| Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing |
| Network Protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN |
| VoIP Passthrough |
H.323 and SIP-ALG protocol NAT helpers for proper routing of VoIP packets |
| Connection Monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall |
Port forward, traffic rules, custom rules, TTL target customization |
| Firewall Status Page |
View firewall statistics, rules, and rule counters |
| Ports Management |
View device ports, enable/disable, configure auto-mode, change transmission speed |
| Network Topology |
Visual representation of network connections |
| Hotspot |
Captive portal, RADIUS authentication (internal/external), SMS authorization, SSO, landing pages, walled garden, user groups, user management, customizable themes |
| DHCP |
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, static leases (MAC with wildcards) |
| DDNS |
Supports >25 providers, manual configuration for others |
| DNS Over HTTPS |
Proxy for secure DNS resolution via HTTPS |
| Network Backup |
Automatic failover: Mobile, VRRP, Wired |
| SSHFS |
Mount remote file system via SSH protocol |
| Traffic Management |
Real-time monitoring, wireless signal charts, traffic usage history |
| Feature |
Details |
| Authentication |
Pre-shared key, digital certificates (X.509), TACACS+, RADIUS (internal/external), IP blocking, login attempt limits, random password generator |
| Firewall |
Preconfigured rules, unlimited custom rules (CLI), DMZ, NAT, NAT-T, NAT64 |
| Attack Prevention |
DDoS prevention (SYN flood, SSH/HTTP attacks), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan) |
| VLAN |
Port and tag-based VLAN separation |
| Mobile Quota Control |
Data limits, customizable periods, warning notifications, phone number integration |
| Web Filter |
Blacklist and whitelist for website filtering |
| Access Control |
Flexible control for SSH, WebUI, CLI, Telnet |
| SSL Certificates |
Automatic generation via Let’s Encrypt and SCEP |
| Feature |
Details |
| OpenVPN |
Multiple clients/servers, 27 encryption methods (e.g., AES-128-GCM, AES-256-CBC) |
| IPsec |
XFRM, IKEv1, IKEv2, with 14 encryption methods (e.g., AES256GCM16) |
| GRE |
GRE tunnel, GRE over IPsec |
| PPTP/L2TP |
PPTP and L2TP client/server instances, L2TPv3, L2TP over IPsec |
| Stunnel |
TLS encryption proxy |
| DMVPN |
Dynamic Multipoint VPN (Phase 2/3, Dual Hub support) |
| SSTP |
Secure Socket Tunneling Protocol (SSTP) client |
| ZeroTier |
ZeroTier VPN client |
| WireGuard |
WireGuard VPN client and server |
| Tinc |
Tinc VPN client and server (encryption, authentication, compression) |
| Feature |
Details |
| Supported Modes |
Server, Client |
| Supported Connection Types |
TCP |
| Custom Registers |
MODBUS TCP custom register block requests, enabling read/write operations to a file inside the router, extending MODBUS TCP Client functionality |
| Supported Data Formats |
8-bit: INT, UINT
16-bit: INT, UINT (MSB or LSB first)
32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| Feature |
Details |
| WEB UI |
HTTP/HTTPS access for status, configuration, firmware update, CLI, troubleshooting, event log servers, firmware availability notifications, and system logs. |
| FOTA |
Firmware update from server with automatic notifications. |
| SSH |
Supports SSH (v1, v2). |
| SMS |
SMS status, configuration, send/read SMS via HTTP POST/GET. |
| Call |
Reboot, status, mobile data on/off, output on/off, and answer/hang-up with timer. |
| TR-069 |
Supports OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly Tech, and AVSystem. |
| MQTT |
MQTT Broker and MQTT Publisher support. |
| SNMP |
Supports SNMP (v1, v2, v3), SNMP Trap, and Brute force protection. |
| JSON-RPC |
Management API over HTTP/HTTPS. |
| RMS |
Teltonika Remote Management System (RMS). |
| Platform |
Monitoring Features |
| ThingWorx |
Monitors WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type. |
| Cumulocity – Cloud of Things |
Monitors Device Model, Revision, Serial Number, WAN Type, IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, Reboot, and Firmware upgrade actions. |
| Azure IoT Hub |
Configures with Data to Server for cloud parameters. Supports Direct Method to execute RutOS API calls. Plug and Play integration with Device Provisioning Service. |
| AWS IoT Core |
Interacts with AWS cloud platform and supports AWS Jobs functionality for device API calls. |
| Feature |
Details |
| Operating System |
RutOS (OpenWrt-based Linux OS). |
| Supported Languages |
Busybox shell, Lua, C, C++, Python, and Java (via Package Manager). |
| Development Tools |
SDK package with a pre-configured build environment for firmware development. |
| GPL Customization |
Create custom-branded firmware and web applications by modifying colors, logos, and other firmware elements to meet client or business branding requirements. |
| Package Manager |
Allows installation of additional software on the device. |
| Interface |
Details |
| Ethernet |
1 x RJ45 port, 10/100/1000 Mbps. |
| I/O |
2 configurable I/O pins on a 4-pin power connector. |
| Status LEDs |
3 connection-type LEDs, 3 connection-strength LEDs, 2 Ethernet status LEDs, 1 power LED. |
| SIM |
1 x Mini SIM (2FF) slot, compatible with 1.8 V/3 V SIMs. |
| Power |
1 x 4-pin power connector. |
| Antennas |
4 x SMA connectors for mobile antennas. |
| USB |
1 x Micro USB providing a virtual network interface. |
| Reset |
Reboot, user default reset, and factory reset options. |
